Author: <Brandon Seo> Email: hyunduck1024@gmail.com
Date: Last modified on <08/20/19>
Keywords: <Solidworks, Tutorial, how to, step-by-step>


The photo above depicts Lego mechanism which allows you to assemble parts. This tutorial shows you how to use solidworks and takes approximately 1 hours to complete.

This tutorial's motivation is to people who are interested is Lego. Readers of this tutorial assumes the reader has the following background and interests:

* Know how to use mouse

The rest of this tutorial is presented as follows:

• Parts List and Sources
• Construction
• Final Words

To complete this tutorial, you'll need the following items
Here is the Solidworks

Step 1
open the Solidworks

Step 2
Click the assembly and Add parts at the left side of screen


Step 3
Change color to match the parts.

Step 4
Assemble the parts. you should use 'mate'.
First, click a surface that you want to mate.
Then, click the 'mate'
Last, click the other surface that you want to mate.
To make flat, also use 'mate'. Click the surface that you want to make parallel
This is video how to do.

Step 5
Gear mate.
This is video

Step 6
How to make Exploded view

Step 7
How to make assembly video.

This tutorial's objective was how to use Studio 2.0. Once the concepts were conveyed the reader could make this themselves.


For questions, clarifications, etc, Email: hyunduck1024@gmail.com