This is an old revision of the document!
Cutting the Plywood
To obtain the measurements for this project I had to project this image onto the Plywood board. Then trace the outline onto the board using pencil. If you are not comfortable doing this most of the measurements are easy enough to estimate.
Cut one side of the plywood and sand the piece down so you have nice clean edges. Afterward trace the part on the other side using the piece you just cut.
This will ensure that the pieces are identical.
Tips For When Cutting
When cutting straight lines use a circular saw to cut clean straight lines. Clamp down a guide and avoid free handing the cut. For the curvy sections use a jigsaw and go very slowly.
.
.
.
.
**__ Cutting the Legs is the most crucial part