User Tools

Site Tools


This is an old revision of the document!

giho Edison IoT Blog link

[DASL IoT Edison #0] Making development environment before starting IoT DASL Basic Tutorial

  • Step 1. Assembling the Intel Edison board with the Arduino expansion boardExternal Link

(Video Version)

  • Step 2. Run the integrated installer* Step 3. Set up a serial terminal

* Step 4. Connect over Wi-Fi * Step 5. Installing Eclipse IDE * Step 6. Blinking an LED using C/C++

          (for verifying developing environment works correctly)

[DASL IoT Edison #1] Automatically connecting Wi-Fi at the booting time [DASL IoT Edison #2] Edison board firmware (devices) [DASL IoT Edison #3] Automatically Running our program at the booting time [DASL IoT Edison #4] Control GUI using QT (PC)

The below video shows the simple IoT demo at the DASL using two Edison board.

intel_edison_light_bulb_iot.1453339852.txt.gz · Last modified: 2016/01/20 17:30 by gihojang