• Step 1.Assembling the Intel Edison board with the Arduino expansion board
  • Video Version
• Step 2. Run the integrated installer
• Step 3. Set up a serial terminal
• Step 4. Connect over Wi-Fi
• Step 5. Installing Eclipse IDE
• Step 6. Blinking an LED using C/C++ (for verifying developing environment works correctly)

1. [DASL IoT Edison #1] Automatically connecting Wi-Fi at the booting time
2. [DASL IoT Edison #2] Edison board firmware (devices)
3. [DASL IoT Edison #3] Automatically Running our program at the booting time
4. [DASL IoT Edison #4] Control GUI using QT (PC)

The below video shows the simple IoT demo at the DASL using two Edison board.