Author: Jihyun Lee Email: ljh11110000@gmail.com
Date: Last modified on <06/10/17>
Keywords: screen printing

The photo above depicts DASL logo screen printed on the black fabric . This tutorial shows you how to do the negative method screen printing and takes approximately half an hour to complete.

This tutorial's motivation is to <fill in the blank>. Readers of this tutorial assumes the reader has the following background and interests:

* Know how to print(draw) and cut

The rest of this tutorial is presented as follows:

• Parts List and Sources
• Screen Printing - Negative Method
• Failures and success of screen printing
• Final words

To complete this tutorial, you'll need the following items

Here is the diazo_instructions.pdf (Not for negative method)

This section gives step-by-step instructions along with photos to screen print DASL logo in a negative method. Negative method is blocking the parts of the screen and printing the parts that is not blocked. This way is easier and you can save time than using all of the materials in the kit.

Step 1 : Things to prepare

1. DIAZO screen printing kit

It includes lots of things but for negative method you will need paint, mesh, squeegee from the kit.

2. Fabric to print.

3. Tape that is water proof due to using paint.
4. Cutter and a sheet of paper.

Step 2 : Screen printing



<Additional steps like Step 3, Step 4, etc>

A link to the source code can be found <provide URL to your code, probably saved in this DASL Wiki>.
The goal of the code is <brief explanation>. It works in the following way

<!- Insert a snippet of your code here. Try to keep to less than 0.5 page long –>

The snippet above serves to <fill in the blank>. It does this by <fill in the blank>.

<!- Insert another snippet of your code here. Try to keep to less than 0.5 page long –>

Next, the code does <fill in the blank>. It does this by <fill in the blank>.

This tutorial's objective was to teach the students how to do screen printing in negative method.

For questions, clarifications, etc, Email: ljh11110000@gmil.com