Author: Jihyun Lee Email: ljh11110000@gmail.com
Date: Last modified on <06/10/17>
Keywords: screen printing

The photo above depicts DASL logo screen printed on the black fabric . This tutorial shows you how to do the negative method screen printing and takes approximately half an hour to complete.

This tutorial's motivation is to <fill in the blank>. Readers of this tutorial assumes the reader has the following background and interests:

* Know how to print(draw) and cut

The rest of this tutorial is presented as follows:

• Parts List and Sources
• Screen Printing - Negative Method
• Failures and success of screen printing
• Final words

US-based vendors to obtain material to complete this tutorial include <list relevant hyperlinks or phone numbers and addresses>.
To complete this tutorial, you'll need the following items

Here is the list as a Google XLS document
Here is the list as a PDF file

This section gives step-by-step instructions along with photos to <fill in the blank>. (If a circuit-building tutorial:) A schematic to construct <fill in the blank> is shown here <add image>. <Add hyperlink to PDF of schematic> is the Acrobat file of the same schematic.

Step 1

<Add photos to make step easier to understand>

Step 2

<Additional steps like Step 3, Step 4, etc>

A link to the source code can be found <provide URL to your code, probably saved in this DASL Wiki>.
The goal of the code is <brief explanation>. It works in the following way

<!- Insert a snippet of your code here. Try to keep to less than 0.5 page long –>

The snippet above serves to <fill in the blank>. It does this by <fill in the blank>.

<!- Insert another snippet of your code here. Try to keep to less than 0.5 page long –>

Next, the code does <fill in the blank>. It does this by <fill in the blank>.

This tutorial's objective was to teach the students how to do screen printing in negative method.

For questions, clarifications, etc, Email: ljh11110000@gmil.com