This is an old revision of the document!
Author: Yu Hang He Email: email@example.com
Date: Last modified on <08/21/17>
Keywords: LabVIEW, NXT, Hitechnic Angle Sensor
The photo above depicts Hitechnic NXT Angle Sensor which allows you to measure axle rotational position and rotation speed. The Angle Sensor enables you to measure absolute angle, accumulated angle, and rotational speed. This tutorial shows you how to use LabVIEW to program Hitechnic NXT Angle Sensor and display the result on front panel and takes approximately 2 hours to complete.
This tutorial's motivation is to demonstrate how to program Hitechnic NXT Angle Sensor with LabVIEW. This tutorial assumes the reader has the following background and interests:
* Know how to program with LabVIEW. (LabVIEW Basic Tutorial)
* Know how to operate LEGO MINDSTORMS NXT.
* Perhaps also understand how to use LabVIEW MINDSTORMS module. (LabVIEW and NXT)
* This tutorial may also attract readers who want to use LEGO MINDSTORMS for instruction purpose.
The rest of this tutorial is presented as follows:
This tutorial's objective was to <fill in the blank>. Complete <choose: construction details, source code and program descriptions> for <fill in the blank>. Once the concepts were conveyed the reader could <fill in the blank>.
Speculating future work derived from this tutorial, includes <fill in the blank>. In the big picture, the problem of <fill in the blank> can be solved with this tutorial.
For questions, clarifications, etc, Email: firstname.lastname@example.org