Differences

This shows you the differences between two versions of the page.

--- optitrack_motion_capture_system_build_skeleton [2017/06/18 18:49] – hyunheelee
+++ optitrack_motion_capture_system_build_skeleton [2017/06/18 23:19] (current) – hyunheelee
@@ Line 26: / Line 26: @@
 </fc>
 \\
+The rest of this tutorial is presented as follows:
+  * [[Optitrack Motion Capture System Build Skeleton#Attach the Dots on the suite|Attach the Dots on the suitey]]
+  * [[Optitrack Motion Capture System Build Skeleton#Dots are attached on the Whole Body Suite|Dots are attached on the Whole Body Suite]]
+  * [[Optitrack Motion Capture System Build Skeleton#Skeleton Wizard|Skeleton Wizard]]
+  * [[Optitrack Motion Capture System Build Skeleton#Video of Skeleton|Video of Skeleton]]
-====Attach the Dots on the suite====
 In order to build skeleton, you need to wear motion capture suite and attach dots on the suite.
@@ Line 34: / Line 40: @@
 . Using 34 dots
 . Using 36 dots
+. Using 38 dots
+====Attach the Dots on the suite====
 In this tutorial, 34 dots used.
@@ Line 66: / Line 75: @@
   * 3 dots on the each hand.
+**Step 4.**
+Attach the dots on the hat.
+{{ hh_mocap:hat.jpg?500 |}}
+  *3 dots on the hat.
+====Dots are attached on the Whole Body Suite====
+{{ hh_mocap:whole-front.jpg?500 |}}
+{{ hh_mocap:whole-back.jpg?500 |}}
+====Skeleton Wizard===
+**Step 1.**
+Start Skeleton Wizard.
+{{ hh_mocap:skel1.jpg?500 |}}
+Click the "Wizard" tap on the top of "Arena" software interface and then click the "Skeleton Wizard".
+**Step 2.**
+Select Marker Layout.
+{{ hh_mocap:skel2.jpg?500 |}}
+Select the "Default Skeleton with 34 markers".(because we attached 34 dots on the suite)
+**Step 3.**
+T-pose.
+{{ hh_mocap:skel14.jpg?500 |}}
+Click "Next" button until "T-pose Data Source" page comes up.(we don't need instruction for markers)
+And, select one of the option where you want to get the T-pose makers from.
+**Step 4.**
+Actor's Height.
+{{ hh_mocap:skel15.jpg?500 |}}
+Adjust the Skeleton's dimension.
+You can change the height and shoulder width of skeleton to fit your actor.
+**Step 5.**
+Skeleton Fitting.
+{{ hh_mocap:skel16.jpg?500 |}}
+The skeleton should be fitted into makers.
+There should be 34 makers when you put your skeleton into markers.
+**Step 6.**
+Marker Assign.
+{{ hh_mocap:skel19.jpg?500 |}}
+Click "Auto-Assign", markers will be assigned automatically base on your skeleton.
-====Start to Capture the motion====
+**Step 7.**
+Review and Finish.
+{{ hh_mocap:skel20.jpg?500 |}}
+{{ hh_mocap:skel22.jpg?500 |}}
+Try to play the video that you recorded for creating skeleton and review your skeleton is working properly.
+If there is no problem, click "Next" button and give name to skeleton that you created and click "Finish".
-**Start to Capture**
-{{ hh_mocap:pic-1.png?500 |}}
-Click the "Capture" tap on the bottom of "Arena" software interface and then click the "play" button,
-and if you are ready to record, click the "record" button.
-**Video of Motion Capture**
+====Video of Skeleton====
-{{youtube>lRoYwiJrUfo?large}}
+{{youtube>61fv6RKzPtY?large}}