making_the_x_axis_moving_part
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| making_the_x_axis_moving_part [2016/04/01 20:54] – suyonglee | making_the_x_axis_moving_part [2016/04/01 21:01] (current) – suyonglee | ||
|---|---|---|---|
| Line 20: | Line 20: | ||
| -5-1 | -5-1 | ||
| - | 5. if you finish the standing, you have to fix the bottom side of 8x6inch board to the Drawer slide using screws but, If you use just 2 screws to fix it, it will not be fixed, | + | 5. if you finish the standing, you have to fix the bottom side of 8x6inch board to the Drawer slide using screws but, If you use just 2 screws to fix it, it will not be fixed. |
| 5-1 so, you should use 4 screws to fix it. | 5-1 so, you should use 4 screws to fix it. | ||
| 6. if you finish the fixing, make it attach the 32x8inch board, when you attach it, left the 3inch space for X axis motor seats. | 6. if you finish the fixing, make it attach the 32x8inch board, when you attach it, left the 3inch space for X axis motor seats. | ||
| + | {{: | ||
| + | -7 | ||
| + | 7. attach the 3x3 size board to the left 3inch space, and attach the X axis motor seats. | ||
| - | (upload soon) | ||
making_the_x_axis_moving_part.1459569256.txt.gz · Last modified: by suyonglee