making_the_y_axis_moving_part
This is an old revision of the document!
Making the Y axis moving part
-Drawing part
-1st trial, but it is wrong size
-2nd trial
1. Prepare 18” (450nm) Drawer Slide x4
2. Cut the quadrangle for 19x6inch size x2 but, It is too small space to move Y axis, so changed the size. 2-1. Cut the quadrangle for 22x6inch size x2
3. Screw the Drawer Slide to 22x6inch structure from bottom side.
making_the_y_axis_moving_part.1459555180.txt.gz · Last modified: by suyonglee