making_the_x_axis_motor_seats
This is an old revision of the document!
Making the X axis motor seats
-Drawing part
-front side picture
-back side picture
1. saw the quadrangle for 6x6inch size x2 and 6x3inch x2
2. make a whole, 1.4 inch diameter, in the 6x6inch wood to suit for stepper motor! - the center of the whole's position: center of the width (3 inch by widthwise), 2.3inch of the height - It must be considered with motor's center
making_the_x_axis_motor_seats.1459553992.txt.gz · Last modified: by suyonglee