ip_const_pneumatic
This is an old revision of the document!
TESTING THE PROPORTIONAL VALVE
Be sure that your code works testing the relation between the proportional valve and your encoders. If you did everything right at the Coding section , when you upload the code into the Arduino and let it run , the system will be steady , and it will move if you move the encoders. To be sure that its working , take the rotational encoder and rotate it and see if the movement of the cart is in the right direction in order to balance the pendulum. In my case , when i rotate the encoder clockwise , the cart should drive backward , to balance it.
ip_const_pneumatic.1457927372.txt.gz · Last modified: by joaomatos