connecting_the_threaded_rod
Connecting the Threaded Rod
1. Prepare the M10x1m Threaded Rod x4 and M10 Prong Tee Nut x4
2. Cut the Rod for 22 inch x2 using Hand Saw
3. Make a suitable size square (ex.5x5cm diameter) to connect the Tee nut, and make a 1cm diameter whole and then connect the Tee nut to the square using Hammer.
4. Attach the Square to the stand of Y axis and the Moving square of Y axis.
5. Connect the Threaded Rod, the original size is to X-axis and the cutting size is Y-axis. 5-1 before connecting, making a whole in the Y-axis moving whole and then connect the Hook for attaching the Wire.
connecting_the_threaded_rod.txt · Last modified: 2016/04/11 01:18 by suyonglee