DASL Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== How To Make the Chair Cover ======
<!-- Replace the above line with the name of your "How To" Tutorial e.g. How to Laser cut Your Name in Wood -->

<!-- Everywhere you see <some sentence>, replace it with the answer (be concise), and remove the < and > brackets -->

**Author:** <Jisu Park, Minju Kang> Email: <lovehihi22@gmail.com> <kangm9@unlv.nevada.edu>
\\
**Date:** Last modified on <10/05/2018>
\\
**Keywords:** <How to make the chair cover>
 
\\
===== Motivation and Audience =====

Learn how to make chair cover using laser cutter, sewing machine and vinyl cutter

==== Parts List and Sources ====



 <!-- in table below, replace ??? with relevant information and add additional lines if necessary -->

<!-- Alternatively create: (1) a Google XLS document that's publicly viewable and provide link; and (2) a PDF version of the Google XLS, store the PDF file in your site, and provide link to it -->

\\

^PART NAME/DESCRIPTION             ^VENDOR              ^VENDOR Number or URL       ^PRICE          ^QTY       ^
| Fabric   | Amazon.com         |link    |$     | 1 |
| Heat transfer Vinyl                   | Amazon.com              | <https://www.amazon.com/RUSPEPA-Heat-Transfer-Vinyl-HTV/dp/B074135W82/ref=sr_1_4?s=arts-crafts&ie=UTF8&qid=1538812088&sr=1-4&keywords=Ruspepa+heat+transfer+vinyl>                     | <>   |  <>   |
| <???>         d                   | <???>              | <???>                     | <???>   |  <???>   |
| <???>         d                   | <???>              | <???>                     | <???>   |  <???>   |
| <???>         d                   | <???>              | <???>                     | <???>   |  <???>   |

==== Making chair cover ====

\\
**Step 1 : Materials**
\\
\\
{{:one.jpg?250|}}
{{:twoo.jpg?200|}}

1) Fabric
\\
2) Heat transfer Vinyl
\\

**Step 2 : Cut the fabric through the laser cutter machine.**
\\
\\
 Before cutting, you have to know your material. Some materials should not be cut on the laser cutter. Therefore, if the material is okay, cut the cloth on its proper size for the laser cutter.
\\
\\
{{:three.jpg?200|}}
{{:four.jpg?200|}}
\\
{{:five.jpg?200|}}
{{:six.jpg?200|}}
\\
The measurement of chair cover can be seen on the above. (You can use a already shaped file)
Make sure that the power is at 1%, and speed is at 100%.
\\
{{:seven.jpg?200|}}
{{:eight.jpg?200|}}
\\
Cut the corner into the circle.
\\
\\
**Step 3 :  Sew the same colored edges using sewing machine.**
\\
\\
{{:nine.jpg?200|}}
{{:ten.jpg?150|}}
{{:eleven.jpg?150|}}
\\

 When you sew the cloth, ensure a curved movement along the edge.
\\
\\
**Step 4 : Next, sew the bottom clearly.**
\\
\\
{{:twelve.jpg?200|}}
\\

\\
\\
**Step 5 : Print the vinyl using the vinyl cutter. **
\\
\\
{{:thirteen.jpg?200|}}
{{:fourteen.jpg?200|}}
\\


Before you use the vinyl cutter, you have to learn how to use the machine. Since we are using the vinyl, make sure to reverse the logo. The width size is 9’’, and the height auto-adjust if you check the ‘keep proportions’ box.

\\
**Step 6 : Get rid of the extra material with exception of the logo.**
\\
\\
{{:fifteen.jpg?150|}}
{{:sixteen.jpg?150|}}
{{:seventeen.jpg?150|}}
\\

\\
Carefully put the vinyl on the cover at the back. Next, use the iron to stick the logo onto the cover, finally remove the transparent part.
\\
{{:eighteen.jpg?200|}}
{{:nineteen.jpg?200|}}
\\

==== Final Words ====

 The main goal of this tutorial is to teach the students how to make the chair cover using the laser cutter, the vinyl cutter and the sewing machine.


\\
\\
\\
For questions, clarifications, etc, Email: <lovehihi22@gmail.com>