DASL Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
**Project02:Midium**

Making the DASL Logo!

01 Finding the moving point.

{{:20160428_143943.jpg?200|}}

02 Making a coding, When I make a code only to connect the X, Y in control board. so I use all of connecting X, Y, Z, A.

N1 G0X-10A-10
N2 G0X0A0Y0Z0
N3 G0Y-120Z-120
N4 G0X36A36
N5 G0X37.8A37.8Y-119.4Z-119.4
N6 G0X39.6A39.6Y-117.6Z-117.6
N7 G0X41.4A41.4Y-114.6Z-114.6
N8 G0X43.2A43.2Y-110.4Z-110.4
N9 G0X45A45Y-105Z-105
N10 G0X46.8A46.8Y-98.4Z-98.4
N11 G0X48.6A48.6Y-90.6Z-90.6
N12 G0X50.4A50.4Y-81.6Z-81.6
N13 G0X52.2A52.2Y-71.4Z-71.4
N14 G0X54A54Y-60Z-60
N15 G0X72A72Y-120Z-120
N16 G0X90A90
N17 G0X108A108Y-60Z-60
N18 G0Y-100Z-100
N19 G0X109.8A109.8Y-103.8Z-103.8
N20 G0X111.6A111.6Y-107.2Z-107.2
N21 G0X113.4A113.4Y-110.2Z-110.2
N22 G0X115.2A115.2Y-112.8Z-112.8
N23 G0X117A117Y-115Z-115
N24 G0X118.8A118.8Y-116.8Z-116.8
N25 G0X120.6A120.6Y-118.2Z-118.2
N26 G0X122.4A122.4Y-119.2Z-119.2
N27 G0X124.2A124.2Y-119.8Z-119.8
N28 G0X126A126Y-120Z-120
N29 G0X180A180
N30 G0Y-40Z-40
N31 G0X216A216
N32 G0Y0Z0
N33 G0X162A162
N34 G0Y-20Z-20
N35 G0X160.2A160.2Y-16.2Z-16.2
N36 G0X158.4A158.4Y-12.8Z-12.8
N37 G0X156.6A156.6Y-9.8Z-9.8
N38 G0X154.8A154.8Y-7.2Z-7.2
N39 G0X153A153Y-5Z-5
N40 G0X151.2A151.2Y-3.2Z-3.2
N41 G0X149.4A149.4Y-1.8Z-1.8
N42 G0X147.6A147.6Y-0.8Z-0.8
N43 G0X145.8A145.8Y-0.2Z-0.2
N44 G0X144A144Y0Z0
N45 G0X108A108
N46 G0X90A90Y-40Z-40
N47 G0X72A72
N48 G0X54A54Y0Z0
N49 G0X0A0

{{:20160429_132431.mp4?200|}}

2. to pain the color.

{{:20160502_185817.jpg?200|}}