DASL Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== How To use Studio 2.0 ======

**Author:** <Brandon Seo> Email: <hyunduck1024@gmail.com> 
\\
**Date:** Last modified on <08/20/19>
\\
**Keywords:** <Studio2.0, Tutorial, how to, step-by-step>
\\

<!-- Add a representative photo of your tutorial below.  Make it centered in the page -->

{{ :studio2.0.png?500 |}}
\\
The photo above depicts Lego mechanism which allows you to assemble parts quickly. This tutorial shows you how to Lego Studio 2.0 and takes approximately 1 hours to complete. 
\\
===== Motivation and Audience =====

This tutorial's motivation is to people who are interested is Lego. Readers of this tutorial assumes the reader has the following background and interests: 

<fc blue>  
  * Know how to use mouse 
\\
  </fc>
\\
The rest of this tutorial is presented as follows:
  * [[tutorialTemplate#partsListAndSources|Parts List and Sources]]
  * [[tutorialTemplate#construction|Construction]]
  * Final Words

==== Parts List and Sources ====

\\
To complete this tutorial, you'll need the following items <!-- in table below, replace ??? with relevant information and add additional lines if necessary -->
\\
Here is the [[https://studio.bricklink.com/v3/studio/download.page|Lego Studio 2.0]]
\\


==== Construction ====
**Step 1**
\\
open the Studio 2.0
\\
\\
**Step 2**
\\
Add parts at the left side of screen
\\
{{:add_bricks.png?300|}}
\\
\\
**Step 3**
\\
Change color to match the parts.
\\
{{:color.png?300|}}
\\
\\
**Step 4**
\\
Assemble the parts.
\\
If you want to change direction, follow this.
\\
{{:click.png?300|}} {{:direction.png?300|}} {{:degree.png?300|}}
\\
\\
Use connection if you want to make sure position of parts.
\\
{{:connect.png?300|}}
\\
\\
**Step 5**
\\
Divide the parts step by step.
\\
{{:steplego.png?300|}}
\\
\\
**Step 6**
\\
To make PDF file, follow this.
\\
{{:instruction.png?300|}} {{:pagedesign.png?300|}} {{:bill.png?300|}}
\\
\\

==== Final Words ====

This tutorial's objective was how to use Studio 2.0. Once the concepts were conveyed the reader could make this themselves.
\\
\\
\\
For questions, clarifications, etc, Email: <hyunduck1024@gmail.com>