DASL Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Introduction of the Sewing machine ======

**Author:** Jihyun Lee Email: <ljh11110000@gmail.com>
\\
**Date:** Last modified on <05/26/17>
\\
**Keywords:** Sewing, Sewing machine 
\\
{{:jihyun:18745400_1422272507829689_1400858776_o.jpg?200|}}

\\
The photo above depicts sewing machine which allows you to do sewing.  This tutorial shows you how to prepare to use a sewing machine and takes approximately 10 minutes to complete. 
\\
===== Motivation and Audience =====

This tutorial's motivation is to <fill in the blank>. Readers of this tutorial assumes the reader has the following background and interests: 

<fc blue>  
  * Know how to <fill in the blank> 
\\
  * Perhaps also know how to <fill in the blank>
\\
  * Perhaps additional background needed may include <fill in the blank>
\\
  * This tutorial may also attract readers who <fill in the blank>
</fc>
\\
The rest of this tutorial is presented as follows:
  * [[tutorialTemplate#partsListAndSources|Parts List and Sources]]
  * [[tutorialTemplate#thingstoprepare|Things to prepare]]  
  * [[tutorialTemplate#startingsewingmachine|Starting sewing machine]]
  * Final Words

==== Parts List and Sources ====

US-based vendors to obtain material to complete this tutorial include <list relevant hyperlinks or phone numbers and addresses>.
\\
To complete this tutorial, you'll need the following items <!-- in table below, replace ??? with relevant information and add additional lines if necessary -->

<!-- Alternatively create: (1) a Google XLS document that's publicly viewable and provide link; and (2) a PDF version of the Google XLS, store the PDF file in your site, and provide link to it -->

\\

^PART NAME/DESCRIPTION             ^VENDOR              ^VENDOR Number or URL       ^PRICE          ^QTY       ^
| Smooth-on Silicone Mold Rubber   | Amazon.com         |http://www.amazon.com/Smooth-Silicone-Making-Rubber-Inc/dp/B004BNF3TK    |$23.86     | 1 |
| <???>        d                    | <???>              | <???>                     | <???>   |  <???>   |
| <???>         d                   | <???>              | <???>                     | <???>   |  <???>   |
| <???>         d                   | <???>              | <???>                     | <???>   |  <???>   |
| <???>         d                   | <???>              | <???>                     | <???>   |  <???>   |

\\
<!-- Replace the URL below for your Google doc -->
Here is the [[https://docs.google.com/spreadsheets/d/1stqow-CHNPdDxXLn5IzECWAmvXnUCEAAxjnDLSSKt2Q/edit?usp=sharing | list as a Google XLS document]]
\\
<!-- Replace the filename with your PDF that you uploaded to your DASL Wiki tutorial page -->
Here is the {{:tutorialtemplategooglexlssamplepdf.pdf| list as a PDF file}}
\\

==== Construction ====

This section gives step-by-step instructions along with photos to <fill in the blank>. (If a circuit-building tutorial:) A schematic to construct <fill in the blank> is shown here <add image>. <Add hyperlink to PDF of schematic> is the Acrobat file of the same schematic.
\\
\\
**Step 1**
\\
\\
<Add photos to make step easier to understand>
\\
\\
**Step 2**
\\
\\
<Additional steps like **Step 3**, **Step 4**, etc>
\\
==== Programming ====

A link to the source code can be found <provide URL to your code, probably saved in this DASL Wiki>.
\\
The goal of the code is <brief explanation>.  It works in the following way
\\
----
<!- Insert a snippet of your code here.  Try to keep to less than 0.5 page long -->
----
\\
The snippet above serves to <fill in the blank>. It does this by <fill in the blank>.
\\
----
<!- Insert another snippet of your code here.  Try to keep to less than 0.5 page long -->
----
Next, the code does <fill in the blank>.  It does this by <fill in the blank>.  
<!-- Keep entering snippets of code and descriptions until you've given enough for a reader to understand how it works -->
//
//
==== Final Words ====

This tutorial's objective was to <fill in the blank>. Complete <choose: construction details, source code and program descriptions> for <fill in the blank>. Once the concepts were conveyed the reader could <fill in the blank>.
\\
\\
Speculating future work derived from this tutorial, includes <fill in the blank>. In the big picture, the problem of <fill in the blank> can be solved with this tutorial.
\\
\\
For questions, clarifications, etc, Email: <paul.oh@unlv.edu>