DASL Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Basic Cutting in 3-Different Woods ======

**Step 1**

Turn on the CNC cutter machine and Software: RetinaEngrave3D

**Step 2**

01. Among the Upper menu, Click the 'A' new text.

\\ {{::untitled0001.jpg?300|}} \\

02. Among the left side menu, write the text in text box.

\\ {{::untitled0002.jpg?300|}} \\

03. After complete writing the text, click the Render to upload the text.

\\ {{::untitled0003.jpg?300|}} \\

04. Control the Laser's Power and Speed, click the Play button.

\\ {{::untitled0004.jpg?300|}} \\

**Step 3**

watch the etching and repeat in other different sizes


\\ {{::20160606_165516.mp4?300|}} \\


===== result =====

Start etching with Using Retina Energy. 

**thin:**

\\ {{::20160606_173640.jpg?300|}} \\

**medium:**

\\ {{::20160606_173630.jpg?300|}} \\

**thickest:**

\\ {{::20160606_173650.jpg?300|}} \\

 I tried to etch the DSAL. When I tried to first time, Only I could etch thickest wood. so I made laser's strength double, but It was not working. but When I controlled Z axis, I could close the distance between wood and laser, so It was working.

 so. Wood's thickness is not problem to etch because I can control the distance.