DASL Wiki

User Tools

Site Tools

Trace:
radio_receiver_connection_with_esc_servos

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
radio_receiver_connection_with_esc_servos [2016/03/20 18:21] – dongbinkimradio_receiver_connection_with_esc_servos [2016/03/20 18:21] (current) – dongbinkim
Line 1: Line 1:
 **-Radio receiver connection with ESC, Servos** **-Radio receiver connection with ESC, Servos**
  
-{{:img_5766.jpg|?300|}}+{{:img_5766.jpg?300|}}
  
 1. Place the receiver as close to the motor as you can. 1. Place the receiver as close to the motor as you can.
  
-{{:img_5785.jpg?|300|}}+{{:img_5785.jpg?300|}}
  
 2. Place ESC to THRO, one servo to AILE and another servo to ELEV. 2. Place ESC to THRO, one servo to AILE and another servo to ELEV.
  
-{{:img_5786.jpg|?300}}+{{:img_5786.jpg?300|}}
  
 3. Make sure you plug in the right direction. Signal, Positive, Negative from left to right. 3. Make sure you plug in the right direction. Signal, Positive, Negative from left to right.
radio_receiver_connection_with_esc_servos.1458523282.txt.gz · Last modified: 2016/03/20 18:21 by dongbinkim