DASL Wiki

User Tools

Site Tools

Trace: • philips_hue_tutorial • basic_cutting_in_3-different_woods • computer_vision_kinect_t1
clear_soap_with_a_toy_inside

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
clear_soap_with_a_toy_inside [2025/03/27 22:57] – yehyunclear_soap_with_a_toy_inside [2025/03/27 23:07] (current) – yehyun
Line 126: Line 126:
   To enhance the uneven texture of the surface, gently shape it with a stick while it’s still semi-soft.   To enhance the uneven texture of the surface, gently shape it with a stick while it’s still semi-soft.
  
-\\ (2) Planet Base+\\ (2) Robot & Earth Layer 
 +{{ :robotsoapstep2.png?nolink&600 |}}
   2-1. Pour the clear base   2-1. Pour the clear base
   Pour the clear soap base (see Section01) into the mold, filling approximately 1/4 of its height.   Pour the clear soap base (see Section01) into the mold, filling approximately 1/4 of its height.
Line 141: Line 142:
   2-4. Pour another layer of clear base   2-4. Pour another layer of clear base
   Pour another thin layer of clear base over the charm to give a sense of distance between the robot and the Earth.   Pour another thin layer of clear base over the charm to give a sense of distance between the robot and the Earth.
-  Repeat the same procedure as in steps 2-1 to 2-3.+  Repeat the same procedure as in steps 2-1 to 2-3(excluding the charm placement in 2-2).
      
   2-5. Create Earth’s land   2-5. Create Earth’s land
   Mix green color powder with the clear base.   Mix green color powder with the clear base.
   Using a stick, gently apply the mixture to a corner of the top layer inside the mold to represent Earth’s land.   Using a stick, gently apply the mixture to a corner of the top layer inside the mold to represent Earth’s land.
 +  
   2-6. Create Earth’s ocean   2-6. Create Earth’s ocean
   Mix blue color powder with the clear base.   Mix blue color powder with the clear base.
Line 152: Line 153:
   Pour slowly so the blue layer slightly overlaps the green land area, representing the sea surrounding the continent.   Pour slowly so the blue layer slightly overlaps the green land area, representing the sea surrounding the continent.
   Hold the tilted position until the soap begins to set and stays in place. Then gently place the mold back down.   Hold the tilted position until the soap begins to set and stays in place. Then gently place the mold back down.
 +  
 +  2-7. Pour the background layer
 +  Prepare the final background layer by tinting the clear base with dark colors such as black or deep blue and adding a touch of silver for a cosmic effect.
 +  If bubbles form during mixing, let the base cool slightly until a thin film appears, then remove the film to avoid trapping bubbles in the final soap.
 +  
 +  2-8. Final pour
 +  Slowly pour the colored base into the mold over the fully set layers.
 +  Pouring too quickly can disturb the layers beneath.
 +  Spray alcohol to eliminate surface bubbles.
 +  
 +  2-9. Completion
 +  Allow the soap to fully harden and cool.
 +  Carefully remove it from the mold.
 +  To preserve the clarity of the transparent layers, wrap the finished soap in plastic wrap immediately.
 +
 +
  
  
clear_soap_with_a_toy_inside.1743141427.txt.gz · Last modified: by yehyun