Differences

This shows you the differences between two versions of the page.

--- bfs_and_dfs_implementation_v2 [2023/11/09 18:54] – [Final Words] fpalustre
+++ bfs_and_dfs_implementation_v2 [2023/11/13 09:56] (current) – fpalustre
@@ Line 1: / Line 1: @@
-====== BFS & DFS Implementation V2 (IN-PROGRSS) ======
+====== BFS & DFS Implementation (2023) (IN-PROGRSS) ======
 **Author:** Francis Palustre Email: <palusf1@unlv.nevada.edu>
 \\
-**Date:** Last modified on <11/09/23>
+**Date:** Last modified on <11/13/23>
 \\
 **Keywords:** Navigation, BFS, DFS, Robotino, cpp,
@@ Line 9: / Line 9: @@
 {{ :sampleimageforwritingtutorial.jpg?200 |}}
 \\
-The photo above depicts <fill in the blank> which allows you to <fill in the blank>. The big picture problem is <fill in the blank>. Solving this partially or completely is important because <fill in the blank>. This tutorial shows you how to <fill in the blank> and takes approximately <fill in the blank> hours to complete.
+The photo above depicts the environment used for travel which allows you to visually see the intended path that should be taken for Robotino . The big picture problem is understanding the traversal process and how it came to be. Solving this partially or completely is important because this gives robots an autonomous navigation process, limiting human interference. This tutorial shows you how to apply BFS and DFS to Robotino and should take approximately 1-2 hour to complete.
 \\
 ===== Motivation and Audience =====