Differences

This shows you the differences between two versions of the page.

--- basic_cutting_in_other_materials [2016/06/20 21:49] – created suyonglee
+++ basic_cutting_in_other_materials [2016/06/28 13:44] (current) – suyonglee
@@ Line 7: / Line 7: @@
 ===== result =====
-Start etching with Using Retina Energy.
+**Plastic:**
-**thin:**
+\\ {{::20160609_183811.jpg?300|}} \\ it requires 45% Strength
-\\ {{::20160606_173640.jpg?300|}} \\
+**Steel:**
-**medium:**
+\\ {{::20160609_183754.jpg?300|}} \\ it requires 45% Strength
-\\ {{::20160606_173630.jpg?300|}} \\
+**Acril:**
-**thickest:**
+\\ {{::20160609_183732.jpg?300|}} \\ it requires 65% Strength (45% is too weak)
-\\ {{::20160606_173650.jpg?300|}} \\
+**Foam:**
+\\ {{::20160609_183745.jpg?300|}} \\ it requires 25% Strength (45% is too strong)
+**Leather:**
+\\ {{::20160617_194334.jpg?300|}} \\ it requires 45% Strength
+**Glass:**
+\\ {{::20160628_132514.jpg?300|}} \\ it requires 25% Strength
- I tried to etch the DSAL. When I tried to first time, Only I could etch thickest wood. so I made laser's strength double, but It was not working. but When I controlled Z axis, I could close the distance between wood and laser, so It was working.
- so. Wood's thickness is not problem to etch because I can control the distance.