woodshop_cnc
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| woodshop_cnc [2021/10/11 19:07] – drodriguez | woodshop_cnc [2021/10/11 19:13] (current) – drodriguez | ||
|---|---|---|---|
| Line 82: | Line 82: | ||
| ==== File Design ==== | ==== File Design ==== | ||
| - | *The software (Carbide Create) provided by the company Carbide 3D can be found on their website and free to download. This is the software that will be used to create the g-code for the Shapeoko CNC.* | + | *The software (Carbide Create) provided by the company Carbide 3D can be found on their website and free to download. This is the software that will be used to create the g-code for the Shapeoko CNC. The .nc file used in this step can not be linked as this would depedent on the thickness and size of the wood board used but the svg file will be attached to the following link: The purpose of this tutorial is to help lab members learn and be able to operate the lab's CNC router, to use in the creation of their own wood projects. The apron created in this tutorial is sized in a way that allows for universal use for almost all body types. This tutorial assumes that the reader has the experience or interest in the following: https:// |
| === Step 1: Job Setup === | === Step 1: Job Setup === | ||
woodshop_cnc.txt · Last modified: 2021/10/11 19:13 by drodriguez