DASL Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

**__ List of Materials __**
\\ {{::20160409_001549_hdr.jpg?300|}} **1.** (x22) 8x1/2" wood screws \\

\\ {{::20160409_002040_hdr.jpg?300|}} **2.** (x10) 5/16" washers for the lag bolts \\

\\ {{::20160409_002151_hdr.jpg?300|}} **3.** (x10) 1/4"x2 1/2" Lag Bolts \\

\\ **4.** 2x4 Fir 8' of length \\
\\ {{::20160409_003157_hdr.jpg?300|}} \\
\\ **5.** 1x4 Fir 6' of Length \\ 
\\ **6.** 1/2" Plywood 4' x 8' The better quality wood, the better the finished product will come out \\
\\ {{::3201_large_3mm_laser_birch_plywood_600mm_400mm.jpg?300|}} \\
\\ **7.** Cushions, You can go to your local hardware store and they usually have them around 22" x 40" stitched together. Alternatively one could use two separate cushions. The width must be 22" unless you adjust all other measurements to accommodate. \\
\\ {{::20160401_204538.jpg?300|}} \\