Differences

This shows you the differences between two versions of the page.

--- tutorialtemplate [2018/10/05 14:55] – minjukang
+++ tutorialtemplate [2023/06/18 19:39] (current) – ischneweis
@@ Line 62: / Line 62: @@
 \\
-==== Construction ====
+==== Setup ====
-This section gives step-by-step instructions along with photos to <fill in the blank>. (If a circuit-building tutorial:) A schematic to construct <fill in the blank> is shown here <add image>. <Add hyperlink to PDF of schematic> is the Acrobat file of the same schematic.
+This section gives step-by-step instructions along with photos to Setup Avatar DARWIN.
 \\
 \\
 **Step 1**
+\\ Plug in a USB extension port to the side of DARWIN (circled in red)
+\\ (*Make sure to use the 90° degree connector so DARWIN doesn’t accidentally knock it out!)
 \\
-\\
+{{}}
-<Add photos to make step easier to understand>
 \\
 \\
@@ Line 99: / Line 100: @@
 ==== Final Words ====
-The main goal of this tutorial is to teach the students how to make the chair cover using the laser cutter, the vinyl cutter and the sewing machine.
+This tutorial's objective was to <fill in the blank>. Complete <choose: construction details, source code and program descriptions> for <fill in the blank>. Once the concepts were conveyed the reader could <fill in the blank>.
+\\
+\\
+Speculating future work derived from this tutorial, includes <fill in the blank>. In the big picture, the problem of <fill in the blank> can be solved with this tutorial.
+\\
+\\
+For questions, clarifications, etc, Email: <[email protected]>
-For questions, clarifications, etc, Email: <[email protected]>