User Tools

Site Tools


tutorialtemplate

This is an old revision of the document!


How To Write a Tutorial

Author: <Type your first and last name here> Email: paul.oh@unlv.edu
Date: Last modified on <MM/DD/YY>
Keywords: <Type a few key words here e.g. Tutorial, how to, step-by-step>


The photo above depicts <fill in the blank> which allows you to <fill in the blank>. The big picture problem is <fill in the blank>. Solving this partially or completely is important because <fill in the blank>. This tutorial shows you how to <fill in the blank> and takes approximately <fill in the blank> hours to complete.

Motivation and Audience

This tutorial's motivation is to <fill in the blank>. Readers of this tutorial assumes the reader has the following background and interests:

* Know how to <fill in the blank>
* Perhaps also know how to <fill in the blank>
* Perhaps additional background needed may include <fill in the blank>
* This tutorial may also attract readers who <fill in the blank>

The rest of this tutorial is presented as follows:

Parts List and Sources

US-based vendors to obtain material to complete this tutorial include <list relevant hyperlinks or phone numbers and addresses>.
To complete this tutorial, you'll need the following items


PART NAME/DESCRIPTION VENDOR VENDOR Number or URL PRICE QTY
Smooth-on Silicone Mold Rubber Amazon.com http://www.amazon.com/Smooth-Silicone-Making-Rubber-Inc/dp/B004BNF3TK $23.86 1
<???> d <???> <???> <???> <???>
<???> d <???> <???> <???> <???>
<???> d <???> <???> <???> <???>
<???> d <???> <???> <???> <???>


Here is the list as a Google XLS document
Here is the list as a PDF file

Construction

This section gives step-by-step instructions along with photos to <fill in the blank>. (If a circuit-building tutorial:) A schematic to construct <fill in the blank> is shown here <add image>. <Add hyperlink to PDF of schematic> is the Acrobat file of the same schematic.

Step 1

<Add photos to make step easier to understand>

Step 2

<Additional steps like Step 3, Step 4, etc>

Programming

A link to the source code can be found <provide URL to your code, probably saved in this DASL Wiki>.
The goal of the code is <brief explanation>. It works in the following way


<!- Insert a snippet of your code here. Try to keep to less than 0.5 page long –>



The snippet above serves to <fill in the blank>. It does this by <fill in the blank>.


<!- Insert another snippet of your code here. Try to keep to less than 0.5 page long –>


Next, the code does <fill in the blank>. It does this by <fill in the blank>.

Final Words

The main goal of this tutorial is to teach the students how to make the chair cover using the laser cutter, the vinyl cutter and the sewing machine.

For questions, clarifications, etc, Email: kangm9@unlv.nevada.edu

tutorialtemplate.1538776530.txt.gz · Last modified: 2018/10/05 14:55 by minjukang