Author: <Type your first and last name here> Email: paul.oh@unlv.edu
Date: Last modified on <MM/DD/YY>
Keywords: <Type a few key words here e.g. Tutorial, how to, step-by-step>

The photo above depicts <fill in the blank> which allows you to <fill in the blank>. The big picture problem is <fill in the blank>. Solving this partially or completely is important because <fill in the blank>. This tutorial shows you how to <fill in the blank> and takes approximately <fill in the blank> hours to complete.

This tutorial's motivation is to <fill in the blank>. Readers of this tutorial assumes the reader has the following background and interests:

* Know how to <fill in the blank>
* Perhaps also know how to <fill in the blank>
* Perhaps additional background needed may include <fill in the blank>
* This tutorial may also attract readers who <fill in the blank>
The rest of this tutorial is presented as follows:

• Parts List and Sources
• Construction
• Programming <!- delete this line if not applicable →
• Final Words

US-based vendors to obtain material to complete this tutorial include <list relevant hyperlinks or phone numbers and addresses>.
To complete this tutorial, you'll need the following items

Here is the list as a Google XLS document
Here is the list as a PDF file

This section gives step-by-step instructions along with photos to <fill in the blank>. (If a circuit-building tutorial:) A schematic to construct <fill in the blank> is shown here <add image>. <Add hyperlink to PDF of schematic> is the Acrobat file of the same schematic.
Step 1
<Add photos to make step easier to understand>
Step 2
<Additional steps»

A link to the source code can be found <provide URL to your code, probably saved in this DASL Wiki>.
The goal of the code is <brief explanation>. It works in the following way

<!- Insert a snippet of your code here. Try to keep to less than 0.5 page long –>

The snippet above serves to <fill in the blank>. It does this by <fill in the blank>.

<!- Insert another snippet of your code here. Try to keep to less than 0.5 page long –>

Next, the code does <fill in the blank>. It does this by <fill in the blank>.