DASL Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== How To Make the Frame of Silkscreen ======
<!-- Replace the above line with the name of your "How To" Tutorial e.g. How to Laser cut Your Name in Wood -->

<!-- Everywhere you see <some sentence>, replace it with the answer (be concise), and remove the < and > brackets -->

**Author:** <Jisu Park> <Minju Kang> Email: <lovehihi22@gmail.com> <kangm9@unlv.nevada.edu> <!-- replace with your email address -->
\\
**Date:** Last modified on <Oct/24/2018>
\\
**Keywords:** <Silkscreen, Frame of Silkscreen>
\\

<!-- Add a representative photo of your tutorial below.  Make it centered in the page -->

\\
===== Motivation and Audience =====

Learn how to make frame of silkscreen using laser cutter

  * Before you start, you have to know how to use laser cutter 
\\
 

==== Parts List and Sources ====


\\
To complete this tutorial, you'll need the following items <!-- in table below, replace ??? with relevant information and add additional lines if necessary -->

<!-- Alternatively create: (1) a Google XLS document that's publicly viewable and provide link; and (2) a PDF version of the Google XLS, store the PDF file in your site, and provide link to it -->

\\

^PART NAME/DESCRIPTION             ^VENDOR              ^VENDOR Number or URL       ^PRICE          ^QTY       ^
| Mesh  | Amazon.com         |https://www.amazon.com/dp/B0181W4FTU/ref=cm_sw_r_other_apa_ZhMXBbD1SKPZG  |$7.5     | 1 |

\\


==== Construction ====

\\
==== Making a frame of the silkscreen ====

\\
**Step 1 : Materials**
\\
\\
{{:m1.jpg?200|}}
{{:m2.jpg?200|}}



1) Extra woods
\\
2) Mesh (Mesh count 160(normal size)) : Choose the mesh count according to the ink.
\\
\\
**Step 2 : Cut the wood through the laser cutter machine**
\\
{{:wood.jpg?200|}}
{{:wood2.jpg?200|}}
{{:ret.png?350|}}

(The size of the red rectangle : 7" x 10"
\\
The size of the skyblue rectangle : 9" x 12")


Before cutting, you need to run the test of wood. You can just follow the example(figure), but you have to ask the meaning of "Adjust Focus" for cutting wood to manager.
\\
\\
 **Step 3 : Stain the frame**
\\
{{:stain.jpg?250|}}

Stain the frame with 'Wood finish stain' because your hands are stained with ash.
\\
\\
**Step 4 : Staple the mesh on the frame**
\\
{{:mesh.jpg?250|}}

Using stapler, fix the mesh on the frame. You need to staple so that it is in line with the opposite side. (Because of feature of fabric)
If you have a staple-gun, you can finish the work faster.
\\
\\
==== Final Words ====

\\
\\
The main goal of this tutorial is to teach the students how to make the frame of the silkscreen using the laser cutter.

\\
\\
For questions, clarifications, etc, Email: <lovehihi22@gmail.com>