User Tools

Site Tools


drexel_star_cubex

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
drexel_star_cubex [2016/11/09 18:32] dwallacedrexel_star_cubex [2016/11/09 18:32] (current) dwallace
Line 5: Line 5:
 {{dylanw:cubex.jpg?600}}\\  {{dylanw:cubex.jpg?600}}\\ 
  
-**General Overview:** To begin the process of creating a printed part from a 3D model, design a part in a CAD package or download one from [http://cubify.com/store/creation_list.aspx?searchtext=&minprice=&maxprice=&category=&tag=&creator=|Cubify.com]]. Before the part can be printed, it must be opened into the CubeX Software (CubeX Software accepts both .stl and .creation files). The CubeX Software creates a .cubex file, which the CubeX uses to build the part. Save the .cubex file onto your USB drive and plug the drive into your CubeX. The CubeX creates the model by pulling filament from the cartridge through the print jets via the delivery tubes. The filament is then jetted through the print tip in a thin string of molten plastic. The print jet is accommodated by the print plate, which lowers incrementally after each layer is deposited so a new layer can be drawn on top of the last, building the+**General Overview:** To begin the process of creating a printed part from a 3D model, design a part in a CAD package or download one from [[http://cubify.com/store/creation_list.aspx?searchtext=&minprice=&maxprice=&category=&tag=&creator=|Cubify.com]]. Before the part can be printed, it must be opened into the CubeX Software (CubeX Software accepts both .stl and .creation files). The CubeX Software creates a .cubex file, which the CubeX uses to build the part. Save the .cubex file onto your USB drive and plug the drive into your CubeX. The CubeX creates the model by pulling filament from the cartridge through the print jets via the delivery tubes. The filament is then jetted through the print tip in a thin string of molten plastic. The print jet is accommodated by the print plate, which lowers incrementally after each layer is deposited so a new layer can be drawn on top of the last, building the
 part up. part up.
  
drexel_star_cubex.txt · Last modified: 2016/11/09 18:32 by dwallace