**Connect to Radio Receiver**

{{:easystar_16_.jpg?300|}}

* As you can see here, you have to know what/where to put. You have two servo motors for elevator&rudder and one ESC for Throttle.

{{:easystar_21_.jpg?300|}}

* Connect the wires to the receiver. please do check more than twice. 



**Binding ESC with the transmitter**

-Here's youtube link as reference. if you are using different transmitter, type 'Name of the transmitter + Receiver' on Youtube. You can easily find a video for binding.

https://www.youtube.com/watch?v=DyMtlj2eaks