User Tools

Site Tools


podo_beg_tut

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
podo_beg_tut [2018/02/13 21:10]
keitaronishimura
podo_beg_tut [2018/02/13 21:13] (current)
keitaronishimura
Line 9: Line 9:
 These tutorials are for students interested in learning about how to program and use the Hubo robots. Both DRC-HUBO and HUBO2 both use similar software. These tutorials are written with the expectation that the student has some knowledge in programming and components such as motors and computers. These two tutorials are for two different applications of PODO. One is for a realtime application for the physical HUBO while the other is to setup simulation software:  ​ These tutorials are for students interested in learning about how to program and use the Hubo robots. Both DRC-HUBO and HUBO2 both use similar software. These tutorials are written with the expectation that the student has some knowledge in programming and components such as motors and computers. These two tutorials are for two different applications of PODO. One is for a realtime application for the physical HUBO while the other is to setup simulation software:  ​
  
-   ​*[[Installing Xenomai3, PODO3, and QT]]+   ​*[[Installing Xenomai3, PODO3, and QT|Installing Xenomai, PODO, and QT]]
 \\ \\
 Follow this tutorial for how to install and set up a real time computer for HUBO. Follow this tutorial for how to install and set up a real time computer for HUBO.
podo_beg_tut.txt ยท Last modified: 2018/02/13 21:13 by keitaronishimura