User Tools

Site Tools


moldmaking_how_the_pros_replicate_objects

Lego Pneumatic Sequencing Tutorials

Author: Jadin Tredup


Introduction:
The big picture of these exercises is to familiarize students with the basics of constructing and designing pneumatic circuits using Lego components. These tutorials will show you first how to construct a Lego pneumatic cylinders with both one and two switches, a motorized Lego air compressor, and a simple circuit using the components from the previous tutorials. The photo below depicts the circuit students will build in the final tutorial.


Parts List and Sources:
A lot of the parts needed for these tutorials have been discontinued by Lego. As a result, they must be bought from mostly secondhand stores. At the time of writing these tutorials, these were the vendors I found to have the most stock of each piece available.

<html><iframe width=“560” height=“315” src=“https://www.youtube.com/embed/6__TKYYJAkI” frameborder=“0” allowfullscreen></iframe></html>

moldmaking_how_the_pros_replicate_objects.txt · Last modified: 2016/03/14 14:46 by yeeunkim