User Tools

Site Tools


material_list

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

material_list [2016/04/06 21:21] (current)
coopermadrazo created
Line 1: Line 1:
 +======Materials Needed======
 +The following are suggested location to buy the material used for this project.
 +  *[[http://​www.amazon.com/​Vandor-85070-Peanuts-Large-Multicolored/​dp/​B00QJUNF16/​ref=sr_1_41?​ie=UTF8&​qid=1458142116&​sr=8-41&​keywords=cool+lunchboxes|Lunch Box]]-A standard metal lunchbox feel free to pick any visual design-$15
 +  *[[http://​www.homedepot.com/​p/​Oriented-Strand-Board-Common-7-16-in-x-4-ft-x-8-ft-Actual-0-418-in-x-47-75-in-x-95-75-in-386081/​202106230|Wood board]]-Used for the mounding of components, sudjested to use spare wood  this purchase would leave excess- $12
 +  *[[https://​www.sparkfun.com/​products/​12219?​gclid=CPvB48HXxcsCFYZefgodpo4GGw|1rpm Motor]]- Used to rotate the diffraction disc, allowing for the diffracted pattern to change-$25
 +  *[[http://​www.amazon.com/​Mosaic-Mercantile-Mirror-2-Inch-Square/​dp/​B0018SXLCW/​ref=sr_1_19?​ie=UTF8&​qid=1458142546&​sr=8-19&​keywords=2in+mirror|1-1/​2in Square Mirrors]]-used within the box to direct the laser beam to the correct location on the diffraction disc-$9
 +  *[[http://​www.onlinemetals.com/​merchant.cfm?​pid=13498&​step=4&​id=1003&​gclid=CM-TwYLT-8sCFcdhfgodBQcKlQ|12inx12in Perforated Aluminum]]-used to fabricate the removal handles and motor mount-$18
 +  *[[http://​www.amazon.com/​Acrylic-Cast-Clear-Sheet-12/​dp/​B00FRUBXKO|12inx24inx1/​8in Clear Acrylic]]- clear acrylic sheet used for diffraction disc from-$5
 +  *[[http://​www.amazon.com/​Quarton-Module-VLM-650-29-LPT-Generator/​dp/​B00BP42YMW/​ref=sr_1_28?​ie=UTF8&​qid=1458143032&​sr=8-28&​keywords=laser+module|X Cross Laser]]-a simple red laser with a operation voltage of 3.5v to 5 v-$18 
 +  *[[http://​www.amazon.com/​DFRobot-ProtoBoard-Pro-Double-Sided/​dp/​B010ZSTKF2/​ref=sr_1_50?​s=pc&​ie=UTF8&​qid=1460002327&​sr=1-50&​keywords=proto+board|Proto Board]]-Base component to solder other electronic components together-$3\\
 +  *[[http://​www.amazon.com/​Logisys-PSAD24-24-Watt-Power-Adapter/​dp/​B003MYLLCC/​ref=sr_1_10?​s=pc&​ie=UTF8&​qid=1460002603&​sr=1-10&​keywords=12v+power+supply|12v Power Supply]]-Power adapter allowing standard wall power socket to power the device-$5
 +===Electronic Components===
 +Each of the following is needed per major component(laser or motor).
 +  *5v power regulator
 +  *capacitor
 +  *240ohm resistor
  
 +  *male/​female barrel connector
 +  *
material_list.txt ยท Last modified: 2016/04/06 21:21 by coopermadrazo