no way to compare when less than two revisions
Differences
This shows you the differences between two versions of the page.
| |
— | material_list [2016/04/06 21:21] (current) – created coopermadrazo |
---|
| ======Materials Needed====== |
| The following are suggested location to buy the material used for this project. |
| *[[http://www.amazon.com/Vandor-85070-Peanuts-Large-Multicolored/dp/B00QJUNF16/ref=sr_1_41?ie=UTF8&qid=1458142116&sr=8-41&keywords=cool+lunchboxes|Lunch Box]]-A standard metal lunchbox feel free to pick any visual design-$15 |
| *[[http://www.homedepot.com/p/Oriented-Strand-Board-Common-7-16-in-x-4-ft-x-8-ft-Actual-0-418-in-x-47-75-in-x-95-75-in-386081/202106230|Wood board]]-Used for the mounding of components, sudjested to use spare wood this purchase would leave excess- $12 |
| *[[https://www.sparkfun.com/products/12219?gclid=CPvB48HXxcsCFYZefgodpo4GGw|1rpm Motor]]- Used to rotate the diffraction disc, allowing for the diffracted pattern to change-$25 |
| *[[http://www.amazon.com/Mosaic-Mercantile-Mirror-2-Inch-Square/dp/B0018SXLCW/ref=sr_1_19?ie=UTF8&qid=1458142546&sr=8-19&keywords=2in+mirror|1-1/2in Square Mirrors]]-used within the box to direct the laser beam to the correct location on the diffraction disc-$9 |
| *[[http://www.onlinemetals.com/merchant.cfm?pid=13498&step=4&id=1003&gclid=CM-TwYLT-8sCFcdhfgodBQcKlQ|12inx12in Perforated Aluminum]]-used to fabricate the removal handles and motor mount-$18 |
| *[[http://www.amazon.com/Acrylic-Cast-Clear-Sheet-12/dp/B00FRUBXKO|12inx24inx1/8in Clear Acrylic]]- clear acrylic sheet used for diffraction disc from-$5 |
| *[[http://www.amazon.com/Quarton-Module-VLM-650-29-LPT-Generator/dp/B00BP42YMW/ref=sr_1_28?ie=UTF8&qid=1458143032&sr=8-28&keywords=laser+module|X Cross Laser]]-a simple red laser with a operation voltage of 3.5v to 5 v-$18 |
| *[[http://www.amazon.com/DFRobot-ProtoBoard-Pro-Double-Sided/dp/B010ZSTKF2/ref=sr_1_50?s=pc&ie=UTF8&qid=1460002327&sr=1-50&keywords=proto+board|Proto Board]]-Base component to solder other electronic components together-$3\\ |
| *[[http://www.amazon.com/Logisys-PSAD24-24-Watt-Power-Adapter/dp/B003MYLLCC/ref=sr_1_10?s=pc&ie=UTF8&qid=1460002603&sr=1-10&keywords=12v+power+supply|12v Power Supply]]-Power adapter allowing standard wall power socket to power the device-$5 |
| ===Electronic Components=== |
| Each of the following is needed per major component(laser or motor). |
| *5v power regulator |
| *capacitor |
| *240ohm resistor |
| |
| *male/female barrel connector |
| * |