User Tools

Site Tools


making_the_x_axis_moving_part

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
making_the_x_axis_moving_part [2016/04/01 20:54]
suyonglee
making_the_x_axis_moving_part [2016/04/01 21:01]
suyonglee
Line 20: Line 20:
 -5-1 -5-1
  
-5. if you finish the standing, you have to fix the bottom side of 8x6inch board to the Drawer slide using screws but, If you use just 2 screws to fix it, it will not be fixed,+5. if you finish the standing, you have to fix the bottom side of 8x6inch board to the Drawer slide using screws but, If you use just 2 screws to fix it, it will not be fixed
 5-1 so, you should use 4 screws to fix it. 5-1 so, you should use 4 screws to fix it.
  
 6. if you finish the fixing, make it attach the 32x8inch board, when you attach it, left the 3inch space for X axis motor seats. 6. if you finish the fixing, make it attach the 32x8inch board, when you attach it, left the 3inch space for X axis motor seats.
  
 +{{:​20160401_205445.jpg?​200|}}
 +-7
  
 +7. attach the 3x3 size board to the left 3inch space, and attach the X axis motor seats.
  
-(upload soon) 
making_the_x_axis_moving_part.txt · Last modified: 2016/04/01 21:01 by suyonglee