User Tools

Site Tools


laser_cutters_for_potential_purchase

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
laser_cutters_for_potential_purchase [2016/01/31 20:19]
rebeccaseddon
laser_cutters_for_potential_purchase [2016/02/01 12:23] (current)
rebeccaseddon
Line 38: Line 38:
  
 ===General Specifications=== ===General Specifications===
 +
 +   *New powerful RetinaEngrave 3D Ethernet + USB controller and software developed by FSL in Las Vegas, NV
 +
 +   *True 20” x 12” cutting area
 +
 +   ​*Patent pending focusing mechanism allows for fully removable Z floor (allows work on materials too big to fit in machine)
 +
 +   *US direct print software drivers work with any program that prints: CorelDraw, AutoCAD, Solidworks, Adobe Illustrator,​ PDF - even MS Word!
 +
 +   *Air assist connection to blow away smoke at the laser head while laser is cutting
 +
 +   ​*Through the lens red pointing laser + beam combiner to see exactly where the cutting will occur
 +
 +   ​*Compact space saving design and weighs only 70 lbs
 +
 +   ​*Optional rotary attachment for engraving round bottles
 +
 +   *30 day money back 100% satisfaction guarantee
 +
 +   ​*Designed and assembled in the USA
  
 ==Pros== ==Pros==
 +
 +   ​*Price is around $3,500 and is manufactured locally.
 +   *The bottom comes out so we can laser cut materials that may not fit inside of the machine
  
 ==Cons== ==Cons==
 +
 +   *Does not sit on a stand. This product would have to be placed onto a table due to its design. May not necessarily be a con, but it may also take up table space that could otherwise be used for other items.
 +
  
 ====High-End==== ====High-End====
  
-[[https://fslaser.com/Products/View/9Full Spectrum Laser Dual Head Laser Cutter]]+[[https://www.morntechusa.com/shop/laser-machines/mt-l570-detail.htmlMorntech MT-L570 60W Laser Cutter]]
  
 ===General Specifications=== ===General Specifications===
 +
 +
 +- Laser Power: 60W, 80W CO2, Water Cooled. (60W Standard)
 +
 +- 2" Lens for Engraving and Cutting. ​ 1000DPI ​
 +
 +- Work Area: 28"​x20"​
 +
 +- Cutting Depth Approx. : 15mm Acrylic, 10mm MDF
 +
 +- Water CHILLER and hoses
 +
 +- Honey Comb cutting table
 +
 +- Z axis height: Approx. 10"
 +
 +- Motorized Z  Axis table
 +
 +- Air assist
 +
 +- Red Dot Pointer
 +
 +- Direct 110V Power Connection ( able to work through you normal 110v home power outlet)
 +
 +- Power consumptions is 900w ~
 +
 +- Software compatibility:​ MS.Windows XP, VISTA, 7.  and Windows 8.1
 +
 +- Corel Draw 12,​X3,​X4.X5,​ X6, X7, AutoCAD plugins for direct engraving
 +
 +- MornTech LASER OEM software
 +
 +   *U.S based support and training
 +
 +
 +CO2 laser machine can be used in a lot of materials, such as leather, cloth, wool, fur, acrylic, plexiglass, wooden board, plastic, resin, rubber, bamboo product, double color board, marble, paper and other non-metal materials.
 +
 +Advantages:
 +
 +1. USB port, support offline work.
 +
 +2. Newest laserwork software, support Coreldraw and Autocad.
 +
 +3. Imported focus len make engraving with higher accuracy.
 +
 +4. Up and down work table, this machine can be added with rotary camp.
 +
 +5. Machine'​s front and back door open, can process on long materials.
 +
 +
  
 ==Pros== ==Pros==
 +
 +   *Will operate with front and back slots open to work on longer materials
 +   *Can cut through slightly thicker materials than the first laser cutter by 20mm. This is dependent upon the material in question.
 +   ​*Worktable can move up and down to give more space for the project.
 + 
  
 ==Cons== ==Cons==
 +
 +   *If using longer materials, the material still has to fit inside of the workspace
 +   ​*Price is $5,900. Can get similar laser cutter for close to half the cost.
 +   *Is made in California. May not be a con, but we would have to tolerate a longer shipping time over a local manufacturer.
laser_cutters_for_potential_purchase.txt · Last modified: 2016/02/01 12:23 by rebeccaseddon