Differences

This shows you the differences between two versions of the page.

--- laser_cutters_for_potential_purchase [2016/01/31 20:19] – rebeccaseddon
+++ laser_cutters_for_potential_purchase [2016/02/01 12:23] (current) – rebeccaseddon
@@ Line 38: / Line 38: @@
 ===General Specifications===
+   *New powerful RetinaEngrave 3D Ethernet + USB controller and software developed by FSL in Las Vegas, NV
+   *True 20” x 12” cutting area
+   *Patent pending focusing mechanism allows for fully removable Z floor (allows work on materials too big to fit in machine)
+   *US direct print software drivers work with any program that prints: CorelDraw, AutoCAD, Solidworks, Adobe Illustrator, PDF - even MS Word!
+   *Air assist connection to blow away smoke at the laser head while laser is cutting
+   *Through the lens red pointing laser + beam combiner to see exactly where the cutting will occur
+   *Compact space saving design and weighs only 70 lbs
+   *Optional rotary attachment for engraving round bottles
+   *30 day money back 100% satisfaction guarantee
+   *Designed and assembled in the USA
 ==Pros==
+   *Price is around $3,500 and is manufactured locally.
+   *The bottom comes out so we can laser cut materials that may not fit inside of the machine
 ==Cons==
+   *Does not sit on a stand. This product would have to be placed onto a table due to its design. May not necessarily be a con, but it may also take up table space that could otherwise be used for other items.
 ====High-End====
-[[https://fslaser.com/Products/View/9| Full Spectrum Laser Dual Head Laser Cutter]]
+[[https://www.morntechusa.com/shop/laser-machines/mt-l570-detail.html| Morntech MT-L570 60W Laser Cutter]]
 ===General Specifications===
+- Laser Power: 60W, 80W CO2, Water Cooled. (60W Standard)
+- 2" Lens for Engraving and Cutting.  1000DPI
+- Work Area: 28"x20"
+- Cutting Depth Approx. : 15mm Acrylic, 10mm MDF
+- Water CHILLER and hoses
+- Honey Comb cutting table
+- Z axis height: Approx. 10"
+- Motorized Z  Axis table
+- Air assist
+- Red Dot Pointer
+- Direct 110V Power Connection ( able to work through you normal 110v home power outlet)
+- Power consumptions is 900w ~
+- Software compatibility: MS.Windows XP, VISTA, 7.  and Windows 8.1
+- Corel Draw 12,X3,X4.X5, X6, X7, AutoCAD plugins for direct engraving
+- MornTech LASER OEM software
+   *U.S based support and training
+CO2 laser machine can be used in a lot of materials, such as leather, cloth, wool, fur, acrylic, plexiglass, wooden board, plastic, resin, rubber, bamboo product, double color board, marble, paper and other non-metal materials.
+Advantages:
+. USB port, support offline work.
+. Newest laserwork software, support Coreldraw and Autocad.
+. Imported focus len make engraving with higher accuracy.
+. Up and down work table, this machine can be added with rotary camp.
+. Machine's front and back door open, can process on long materials.
 ==Pros==
+   *Will operate with front and back slots open to work on longer materials
+   *Can cut through slightly thicker materials than the first laser cutter by 20mm. This is dependent upon the material in question.
+   *Worktable can move up and down to give more space for the project.
 ==Cons==
+   *If using longer materials, the material still has to fit inside of the workspace
+   *Price is $5,900. Can get similar laser cutter for close to half the cost.
+   *Is made in California. May not be a con, but we would have to tolerate a longer shipping time over a local manufacturer.