User Tools

Site Tools


hdt_setup

This is an old revision of the document!


How To Move A HDT MK2 Arm

Author: Sangsin Park Email: sangsin.park@unlv.edu
Date: Last modified on 05/15/2017
Keywords: forward and inverse kinematics

hdt_mk2_arm.jpg
The HDT arm has 14 degrees of freedom (DOF). Especially, 3 DOFs, 3 DOFs, 1 DOFs, 3 DOFs, and 4 DOFs are located in a torso, a shoulder, an elbow, a wrist, and a hand, respectively.

BODY PART DOFs
Torso 3
Shoulder 3
Elbow 1
Wrist 3
Hand 4
Total 14


Coordinate Frames of the HDT Arm

First of all, I consider 10 DOFs except the hand's DOFs.

hdt_fig1.jpg

Standard DH parameters of the HDT Arm

Standard DH parameters and link lengths are shown in tables. hdt_tab1_dh.jpg
hdt_tab2_length.jpg

Verification of the DH parameters

I verify the DH parameters with a Matlab robotics toolbox. We can download its toolbox from this website.

hdt_fig2.jpg
hdt_fig3.jpg

Matlab Code

clear, close all

L1 = 0.1272;
L2 = 0.08;
L3 = 0.3638;
L4 = 0.2495;
L5 = 0.318;
L6 = 0.2244;
L7 = 0.0741;
L8 = 0.2;

% Standard DH %
L(1) = Link([0 L1 0 pi/2]); % L1
L(2) = Link([0 0 L2 -pi/2]); % L2
L(3) = Link([0 0 L3 pi/2]); % L3
L(4) = Link([0 L4 0 -pi/2]); % L4
L(5) = Link([0 0 0 pi/2]);
L(6) = Link([0 L5 0 -pi/2]); % L5
L(7) = Link([0 0 0 pi/2]);
L(8) = Link([0 L6 0 -pi/2]); % L6
L(9) = Link([0 0 L7 pi/2]); % L7
L(10) = Link([0 0 L8 0]); % L8

hdt_arm = SerialLink(L, 'name', 'HDT ARM');
hdt_arm.plot([pi pi/2 0 0 -pi/4 0 0 0 -pi/2 0]);
hdt_setup.1494896234.txt.gz · Last modified: 2017/05/15 17:57 by sangsinpark