fabrication_methods_schedules_and_other_related_content
This is an old revision of the document!
Fabrication Methods, Schedules, and Other Related Content
Fabrication Methods
These models will be constructed from corrugated cardboard. The Universal M-300 laser cutter at UNLV will be used to cut out the pieces.
Once the pieces have been cut out, they will be aligned and then glued together. Afterwards, the model will be covered in papier mache and painted.
fabrication_methods_schedules_and_other_related_content.1454187621.txt.gz · Last modified: 2016/01/30 13:00 by rebeccaseddon