User Tools

Site Tools


cnc_hello_world_tutorial_1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
cnc_hello_world_tutorial_1 [2017/01/29 15:31] jeanvazcnc_hello_world_tutorial_1 [2017/01/30 15:15] (current) jeanvaz
Line 29: Line 29:
  
 ==== Procedure ==== ==== Procedure ====
 +
 +Start-up the machine(See the tutorial 0 on how to properly start the machine)
  
 We will be using ordinary wood 17" by 3.25". We will be using ordinary wood 17" by 3.25".
  
-{{dsc_5590.jpg?nolink|}}+{{dsc_5590.jpg?nolink&&600|}}
 \\ \\
 \\ \\
 **Step 1** **Step 1**
-\\+\\ First: Make sure to use the universal adjusters cubs are well positioned, in order to settle the wood parrelel with the table
 \\ \\
  
 +{{:dsc_5592.jpg?nolink&600}}  
 \\ \\
-Figure 1: ......+Figure 1: wood block settled on the table.
  
-First, ...... 
-\\ 
 \\ \\
 **Step 2** **Step 2**
 +\\ Make sure to set the 1" end mill on the spindle for this tutorial
 \\ \\
 +{{:dsc_5593.jpg?nolink&600}}
 \\ \\
-{{:?nolink|}} +Figure 2: HSS End Mills
-\\ +
-Figure 2: .......+
  
-Next, ..... 
-\\ 
 \\ \\
 **Step 3** **Step 3**
 +\\ Throughout the navigation menu by clicking Conversational>Engrave
 +at the proper tab type the text that you desire to write: DASL@UNLV
 \\ \\
-\\ +{{:dsc_5595.jpg?nolink&600}}
-{{:?nolink|}}+
 \\ \\
 Figure 3: ..... Figure 3: .....
  
-Next, .... 
-\\ 
 \\ \\
 **Step 4** **Step 4**
 +\\ Make sure to set the "zero's" axis close to the left bottom corner. Once the tool is at an appropriate position, press the ZERO X; ZERO Y; ZERO Z.
 \\ \\
 +{{:dsc_5552.jpg?nolink&400}} {{:dsc_5599a.jpg?nolink&400}}
 \\ \\
-{{:?nolink|}} +Hence, insert the X BASE = 0; Y BASE = 0; Z STAR = 0; Z DEPTH OF CUT = 0.2 & HEIGHT = 1.5 
-\\ + 
-Figure 4: .....+Finally save the project by clicking "Post to File"
  
-Next, .... 
-\\ 
 \\ \\
 **Step 5** **Step 5**
 +\\ Once the file is properly saved and ready to run make sure to check the position (using the jog shuttle) of the letter in perspective with the 2x4 wood (If the letters seems to small or big, adjust the coordinates accordingly). The G code is shown at the top left corner. 
 \\ \\
 +{{:dsc_5554.jpg?nolink&600}}
 \\ \\
-{{:?nolink|}} +Figure 5: Home screen.
-\\ +
-Figure 5: .....+
  
-Next, ...... 
-\\ 
 \\ \\
 **Step 6** **Step 6**
 +\\ Finally press the CYCLE START in order to initiate the process.
 \\ \\
 +{{:dsc_5558.jpg?nolink&600}}
  
-Now ...... 
-\\ 
 \\ \\
 **Step 7** **Step 7**
 +\\ Once the process is done, remove the wood block from the table and check the final result.
 \\ \\
 +{{:dsc_5552.jpg?nolink&400}} {{:dsc_5563.jpg?nolink&400}}
  
-When .... 
-\\ 
-\\ 
-**Step 8** 
-\\ 
-\\ 
-{{:?nolink|}} 
 \\ \\
-Figure 8: ...... 
- 
-Start by setting ..... 
  
 +==== Videos ====
 \\ \\
-\\ +{{youtube>qRyifYpdCTc?medium}}
-**Step 9** +
-\\+
  
-Next,  +{{youtube>24sd0q9MIOU?medium}}
- +
- +
-\\ +
-{{youtube>nobExDW7gEk?medium}}+
 // //
 // //
 +
 ==== Commentaries ==== ==== Commentaries ====
  
-This tutorial's objective was to .....+This tutorial's objective was to introduce basic commands and applications for the Thormac 1100 Machine.
 \\ \\
 \\ \\
-dfhkjhsdfkjksdfkj 
 \\ \\
 \\ \\
cnc_hello_world_tutorial_1.1485732679.txt.gz · Last modified: 2017/01/29 15:31 by jeanvaz