User Tools

Site Tools


cnc_hello_world_tutorial_1

This is an old revision of the document!


CNC Tormach PCNC 1100 Tutorial 1

Author: Jean Chagas Vaz Email: [email protected]
Date: Last modified on 01/29/17
Keywords: Tutorial, Machining, step-by-step

This tutorial shows how to engrave text on wood.


Motivation and Audience

Make sure to use safety equipment during the experiment.

* Engraving “DASL@UNLV” on wood.

Materials and Sources

This tutorial assumes the reader has not had any contact with the CNC Tormach PCNC 1100. Therefore, all the basic operations shall be detailed. Useful links can be find below:

Procedure

We will be using ordinary wood 17“ by 3.25”.



Step 1


Figure 1: ……

First, ……

Step 2


Figure 2: …….

Next, …..

Step 3


Figure 3: …..

Next, ….

Step 4


Figure 4: …..

Next, ….

Step 5


Figure 5: …..

Next, ……

Step 6

Now ……

Step 7

When ….

Step 8


Figure 8: ……

Start by setting …..



Step 9

Next,


Commentaries

This tutorial's objective was to …..

dfhkjhsdfkjksdfkj

cnc_hello_world_tutorial_1.1485732679.txt.gz · Last modified: 2017/01/29 15:31 by jeanvaz