This is an old revision of the document!
Table of Contents
CNC Tormach PCNC 1100 Tutorial 1
Author: Jean Chagas Vaz Email: chagasva@unlv.nevada.edu
Date: Last modified on 01/29/17
Keywords: Tutorial, Machining, step-by-step
This tutorial shows how to engrave text on wood.
Motivation and Audience
Make sure to use safety equipment during the experiment.
* Engraving “DASL@UNLV” on wood.
Materials and Sources
This tutorial assumes the reader has not had any contact with the CNC Tormach PCNC 1100. Therefore, all the basic operations shall be detailed. Useful links can be find below:
| Page Name | Link |
|---|---|
| Tormach PCNC 1100 | https://www.tormach.com/product_pcnc_main.html |
| Mastercan | http://www.mastercam.com/en-us/ |
Procedure
This section ……
Step 1
Figure 1: ……
First, ……
Step 2
Figure 2: …….
Next, …..
Step 3
Figure 3: …..
Next, ….
Step 4
Figure 4: …..
Next, ….
Step 5
Figure 5: …..
Next, ……
Step 6
Now ……
Step 7
When ….
Step 8
Figure 8: ……
Start by setting …..
Step 9
Next,
Commentaries
This tutorial's objective was to …..
dfhkjhsdfkjksdfkj