User Tools

Site Tools


basic_cutting_in_3-different_woods

This is an old revision of the document!


Basic Cutting in 3-Different Woods

Step 1

Turn on the CNC cutter machine and Software: RetinaEngrave3D

Step 2

01. Among the Upper menu, Click the 'A' new text.



02. Among the left side menu, write the text in text box.



03. After complete writing the text, click the Render to upload the text.



04. Control the Laser's Power and Speed, click the Play button.



Step 3

watch the etching and repeat in other different sizes



result 01

Start etching with Using Retina Energy.

thin:



medium:



thickest:



I tried to etch the DSAL. When I tried to first time, Only I could etch thickest wood. so I made laser's strength double, but It was not working. but When I controlled Z axis, I could close the distance between wood and laser, so It was working.

so. Wood's thickness is not problem to etch because I can control the distance.

basic_cutting_in_3-different_woods.1466483991.txt.gz · Last modified: 2016/06/20 21:39 by suyonglee